Community
Fusion Manufacture
Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

4 Axis - Help with 2D Wrap for A Axis milling

1 REPLY 1
Reply
Message 1 of 2
davidscott
68 Views, 1 Reply

4 Axis - Help with 2D Wrap for A Axis milling

I can't seem to get the 4 Axis wrap to work with machining these faces on a mill.

 

I realize I have to do the processes separately, but I can't get it to produce tool paths on individual processes.

 

The stock is a close fit rectangular section, and the center of the radius is not the center of the part or the stock (I hope this is not a deal breaker) - maybe this is the issue, but it is a constant radius along the part for each process. I hope to achieve the 4 radiuses around the part to blend.

 

I have tried -

   2D Adaptive Clearing

   2D Pocket

   2D Contour

 

If this is the issue, is there a work around.

 

Thanks

Dave

1 REPLY 1
Message 2 of 2
davidscott
in reply to: davidscott

I'm Not sure why but all images seem to be the same ???

 

The other face is the top larger radius.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report