Community
Fusion Manufacture
Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

2D adaptive ignoring stock?

2 REPLIES 2
Reply
Message 1 of 3
Anonymous
400 Views, 2 Replies

2D adaptive ignoring stock?

Hello,

 

I've been having this issue with 2D adaptive where it seems to ignore the stock and instead of helixing down into the material, it simply plunges right into the stock and does rapids through the stock. The cut itself looks normal, but it seems to forget where the stock is at. See attached file for a screen capture of my issue.

 

Thanks in advance,

B. S.

Tags (3)
2 REPLIES 2
Message 2 of 3
daniel_lyall
in reply to: Anonymous

You need to post the model so your selection can be looked at, To do this Go to File -> Export and save as a .F3D Archive File and attach it to your next post.


Win10 pro | 16 GB ram | 4 GB graphics Quadro K2200 | Intel(R) 8Xeon(R) CPU E5-1620 v3 @ 3.50GHz 3.50 GHz

Daniel Lyall
The Big Boss
Mach3 User
My Websight, Daniels Wheelchair Customisations.
Facebook | Twitter | LinkedIn

Message 3 of 3
randyT9V9C
in reply to: Anonymous

2D adaptive isn't model stock aware. Try selecting the region using 3D adaptive and it should helix in. You may have to create a containment sketch. Alternatively, pre-drill the entrance location.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report