water jet

[agtrek1]

Hi all

i have a dardi water jet with a fagor8035 controller when i got the machine it come with newcam by newage on a xp desk top that i have used to get gcode (pim file) to run the machine.

I used fusion 360 a little and enjoy using fusion

I needing help with post processor for my machine I wanting to use fusion 360 for cad and nesting etc

From what i under stand fusion post file has to be cps file and i cant find a post processor in fusion 360 to work.

I have a tbl file that i have save as a  note file that i got from the new cam program (see attached)that look to be a post processor but its not a cps file that fusion ask for

I  new to this cnc world.

Any help please

i would like to a one stop shop for cad and cam from fusion 360 so i don't have to draw in fusion then export to newcam to get my g code to run the waterjet.

[Warmingup1953]

Can you share a working NC code file?

[agtrek1]

This work on the waterjet

[Warmingup1953]

That seems odd?

Perhaps test it here. 

[boopathi.sivakumar]

Hi @agtrek1 

Do you have Fagor controller programming manual? 

I can able to help you out to create a new post

[agtrek1]

Hope this helps

[boopathi.sivakumar]

Hi @agtrek1 

I have sent the PM on the fagor waterjet post. Kindly check and let me know the feedback