Unable to find fanuc .cps file in Actions> Post Process

[rushabhthakkar_910]

I have uploaded a Fanuc.cps file to Manage> Post Library. (See below image)

But upon going for post process, I don't seem to find Fanuc anywhere (Not in Local, cloud, etc.)

Have been through this, but stuck after this.. https://www.autodesk.com/support/technical/article/caas/sfdcarticles/sfdcarticles/How-to-add-a-Post-...

   

[programming2C78B]

Local and Cloud are two different libraries. You wouldn't see it in both unless you put it in both. 

[rushabhthakkar_910]

I have added .cps file in both Local as well as Cloud in Post Library. 

But still it is not visible in Post Process. 

Also when I try to add the file directly in Post Process, .cps file type does not show up. Only Machine, f3d file types are coming as options to select. 

[viacheslav.shapilov · Accepted solution]

Hello, @rushabhthakkar_910 .

I suspect, you are pressing wrong button on NC Program dialog. Because on the left side you show post library, while on the right side is a machines library.

Post processor is selected in a second highlighted row. If you don't want to use machine kinematics, just untick the Use Machine configuration checkbox.

[rushabhthakkar_910]

@viacheslav.shapilov, Yes, I was selecting the wrong option. 

But now I can see the fanuc.cps file and generate the G-code too. Thank you so much for the guidance !!