turning problem with boring

[j_cavender]

my boring tool wants to retract to zero before exiting i have attached the file it is in setup 3 what am i doing wrong and how do i fix it ive  tried everything i can think of

[j_cavender]

anybody?

[j_cavender]

can someone please tell me what im doing wrong

[j_cavender]

@jeff.walters can you help?

[j_cavender]

anybody?!?!

[Anonymous]

The only way I can get it to not do that is change the Direction from "Front to back" to "Both ways" which probably isn't something that you want.

[j_cavender]

yeah i dont want to back bore. i can edit the code but i really shouldnt have to

[Anonymous · Accepted solution]

Oh.. this is the same bug that gives you the "Toolpath crosses rotary axis" warning.

If there is no through-hole the tool will return to zero like it is now.  I added a hole through it and it returns to the radius of the hole now.

[j_cavender]

so it doesnt like blind boring. so you have to lie to it by making a through hole?

[Anonymous]

Until they fix the issue it's the only way (that I know of) to eliminate that retract to zero at the end.  I would expect it to use the clearance radius setting, but instead it seems to evaluate the part and find the smallest radius through hole and move to that radius before pulling out of the part.

[j_cavender]

thanks!!!