Trouble running gcode

[rinMJQG5]

I have created a model of an electric guitar. Made tool paths and tried running the gCode on my desktop cnc. Its been a very steep learning curve. BUT I am at the point where I am getting lots of varied results from my G Code. One bit of code doesn’t match up with another bit of the design it should match up with. On occasion there will be a jump in the cutting of the path and not a small jump a couple of millimetres half way through. I can’t really see the rhyme or reason. Looking at the visualisatin of the gcode it all looks as its designed. I use Easel - is that my problem? Is it a dud desktop router? Its summer and my shed gets hot is my router getting too hot and freaking out. Have I used the wrong kind of tool paths ie 2DAdaptive Clearing when I should have used a 2DPocket. Its all a mystery. All I can say is I am glad I had lots of old oregon to do my practicing on! 

Here is my Fusion 360 file if anyone wants to look at it and offer some help!!!

[seth.madore]

Do you have any photos of the machined part that shows these flaws?
What exactly is your desktop CNC? 

[rinMJQG5]

herre we go Seth, looks pretty ugly. my machine is the Australian manufactured BlueCarve

[seth.madore]

Okay, the BlueCarve appears to be a light duty machine (nothing wrong with that), you may need to reduce your Optimal Load on your Adaptive toolpaths. You have it set to 2.4mm, which is almost 50% of the tool diameter. I'd suggest no more than 25-30% stepover.

At what point in the program did you notice these errors, I don't recall you mentioning that in your first post