tool path, center cut line for plasma

[brockdwelds]

in the attached project under 2d profile 5, I am trying to cut straight lines along the bends . I thought I had the settings right but I'm still getting what look like lead ins. even though all those options are deselected and I have it set to center cut how can I fix this.  Any help is greatly appreciated.

[engineguy · Accepted solution]

@brockdwelds 

Try setting your "Pierce Clearance" either to "0" or the actual distance of your first cut from the top edge which is 0.945in and it moves the start positions to on the centre line 🙂 🙂

Stay Safe

Regards

Rob