Thread turning from chuck

[gavinALVQ8]

Is it possible to program threading away from the chuck in fusion and get a RH thread?

[a.laasW8M6T · Accepted solution]

Hi

It looks like you have this set up correctly, LH tool upside down in turret & Counterclockwise spindle direction, It just seems that the simulation isn't correctly displaying the spindle going backwards for the threading cycle.

I think if you run this on the machine it will actually be correct.

[gavinALVQ8]

Hello,

Thank you for taking a video of that just seemed odd that the thread looked opposite to what I was expecting.