Thread Turning Changed

[Anonymous]

Today something in Fusion seemed to have changed.

When I would post out standard single point threading on the Lathe I would get code like this (Note the G1 line and Feedrate): 

...

N24 G54
N26 G0 X25.0012
N27 Z5.1346
N28 Z1.2132

N29 G1 X24.5012 F1
N30 G33 Z-7.7468 K1
N31 G33 X26.7332 I1
N32 G0 Z1.1546

....

But all of a sudden with the same exact post processor I get code that errors out because it doesn't post the G1 and Feedrate line:

N26 G0 X25.0012
N27 Z5.1346
N28 Z1.2132
N29 X24.5012
N30 G33 Z-7.7468 K1
N31 X25.0012
N32 Z1.1546

-----------------

Anyone have any ideas?

Thanks in advance.

[randyT9V9C]

What post are you using? I suspect the post changed. 

[Anonymous]

Nope it’s a post I customized a while back

[Anonymous]

Here's the screen cast of what the problems.  Also attaching the post here:  https://a360.co/2KslHba