Tapered mill cuts into the body

[Anonymous]

Hi! 

So my problem is:  
I want to cut a contour with a 5.4 ° tapered bit, but the cutting head cuts into the body. How can I extend the contour so that the head does not cut into the body?

Thanks 

[Tom.Hemans · Accepted solution]

Hi @Anonymous,

You can set a Stock to leave (in the Passes tab) that will move the tool away from the part by the distance set.

Hope this helps,

Tom

[seth.madore]

And if that doesn't solve it, can you export and share your file?
File > Export > Save to local folder, return to thread and attach the .f3d file in your reply

[Anonymous]

Yeah, This solved it. Thanks 🙂