Spiral strategy added to 2D face processing.

[monozukuri.daisuki.higucchan]

2D face processing is currently only available for parallel paths with specified cutting angles.
We would like to have a strategy where the entry point can be selected from 4 corners (X+Y+, X-Y+, X-Y-, X+Y-), and from the starting corner, a spiral cut can be made toward the center by down-cutting or up-cutting.

[CNC_Lee · Accepted solution]

@monozukuri.daisuki.higucchan 

You can achieve  a similar result using a 2D or 3D adaptive toolpath.

[monozukuri.daisuki.higucchan]

Thanks for the advice.
I had not thought of using a 3D toolpath strategy, but using 3D flat area machining gave me the toolpath I was hoping for.
Appreciate your help.