Spindle direction wrong using a part off tool

[dmealer]

When using a part off tool in fusion...my lathe spindle always come on in the wrong direction.

No matter how I orient the tool in set-up and no matter if the clockwise button is checked or un checked...I get a M3 output. Which cost me some expensive tooling. What is the procedure to get a M4 output?

Is this a bug? If so it's a costly one.

Thanks

[s.noke71]

Have you changed the direction in the tool library.

Spindle direction in setup

[Ketherton21]

I posted the same issue weeks ago and never got a response....

delete the tool and recreate it.

[dmealer]

Does that do the trick?