Simulation problem

[DidierDelcorde]

Hello,
When I do a 360 fusion simulation in manufacture mode, normally when the simulation is finished it stops automatically, at home the simulation always starts again 10x 20x 30x while I don't stop it myself, I can't manage to find the solution, thank you in advance and have a good day.
Didier.

[porsbym]

Try right clicking in the model view and check if you have the Loop option enabled:

[DidierDelcorde]

Ok perfect problem solved a thousand times thank you.
Didier.

[DidierDelcorde]

Ok perfect problem solved a thousand times thank you.
Didier.