post processor

[dimikosto]

i have a boring horizontal heindenhain control i work fusion 360 well only in 3 axis x,y,z i want to work and 4th axis B is rotary table. but the machine dont support the post processor with b axis. what can i do?

[engineguy]

@dimikosto 

You don`t give the Axis that the B axis rotates around on your CNC so I have assumed it is fairly standard with the Head moves up/down in the Y, the X moves left/right and the Z moves in/out.

If that is the configuration of your CNC machine then try the attached Post Processor, I have set it for B axis rotating around the Y so hopefully it will be somewhere close to what you need 🙂

[dimikosto]

thank you! you are correct! my Head moves up/down in the Y, the X moves left/right , the Z moves in/out , w axis moves in/out and B axis rotating around the Y. i dont know if works, i try to put it in the machine but the type of file is ".I" and my files is running with type ".h" can you help me please?