Post processor not compatible with machine

[GielWNLDD]

I am building a DMU 80T 5 axis machine with XYB and ZC movement but every post processor that i use gives me an error for Post processor not compatible with machine simulation. I have a Post processor specially for the 80T and that is also not working.

[seth.madore]

Which post processor are you using? If it's a legacy post (one that you've relied on for some time), it likely does not have the logic in it to properly handle machine simulation, and will fail with the error you are seeing.

[GielWNLDD]

I have test it with de post processor of the Siemens SINUMERIK 840D, Heidenhain iTNC 426 and our own post processor for the DMU 80T and non of those works. Is it possible that it is up to my kinematics or the orientation of my machine body's or is it my post processor.

[seth.madore]

Well, all those posts from our library are marked as "Machine Simulation" capable, so it sounds that it might be an issue with your machine config file.

[GielWNLDD]

I have found the problem in my machine builder and now it works with the post processors of fusion 360 but not with the one I use on the machine. 

How can i solve this?