Post Processor for Leadwell CNC milling and turning

[neelsMWJUV]

Good day,

I am in need of a post processor for a leadwell CNC milling and turning machines.

If anyone can help me it would be much appreciated.

Machines are the following:

Leadwell CNC Lathe (T-7A)

Leadwell CNC Lathe (LTC-200)

Leadwell CNC Mill (V-30IF)

Leadwell CNC Mill (V-32IF)

Thank you.

[seth.madore]

Are those Fanuc based machines? We don't have any specific post processors for those, so I would point you in the direction of a similar machine and control. For milling:

1) I'd likely start with the Doosan or Fanuc post

For Turning:

2) Fanuc Turning or a Samsung/Doosan Turn/Mill post (if your machines have C/Y ability)

Edits are going to be needed.

[neelsMWJUV]

Thank you.

The machines run off Siemens Software, I run the Siemens 810D post processor currently, it is working but I am not able to preview the machining on the Mill prior to startup. Thank you, I will try the Doosan first as recommended. 

[seth.madore]

If they are Siemens based machines, you're going to need to use the Siemens post. A Fanuc based post is not going to give you the code you need.

[AdamKunzo]

Hello @neelsMWJUV 

I sent you a private message about. Let me know if you need a help  with these post processors.