Need Suggestions for removal of these steps like portion of the model

[shubham.raturi2308]

Need help in selecting a path for the steps, I created during roughing machining.

I am unable to finish these steps.

 

 

 

[engineguy · Accepted solution]

@shubham.raturi2308 

Easiest would be using a long 16/18mm Bull Nose with a 6mm Radius and a simple 2D Contour as a Finishing Pass.

Either you have/need to buy the tool or use a 3D Parallel/Scallop toolpath if using a smaller tool with a smaller Radius.