NC Program

[ashwin_sWGYU]

I have been using powermill recently shifted to fusion 360 

in powermill I used to create individual nc program in one click for all toolpath 

in fusion I need to click on individual toolpath go to process which is very time consuming if I have more than 4 tools 

Any solutions please 

[seth.madore]

Select the toolpath(s) you wish, right click and select "Create NC Program". You can also just select the Setup and then do the same steps

 

[programming2C78B]

click on the setup folder, then post. 

[akash.kamoolkar]

@ashwin_sWGYU you can select a setup or multiple toolpaths, right click and select "create NC program". that way all those selected toolpaths will be post processed at once and you can save that selection as well.

Regards,

[ashwin_sWGYU]

I click on setup to create nc program but by default it puts all toolpath
in ATC which I don’t want

[seth.madore]

Clicking on the Setup and creating an NC program will put all the toolpaths of the Setup in there.

Selecting individual toolpaths and then doing the same will create an NC Program with just the selected toolpaths.