Mori Seiki SL 15 Post processor

[rjkootCC85N]

Mori Seiki SL 15, need a post processor for Yasnac control 

[seth.madore]

I think you're going to have to work with the Fanuc turning post processor and modify to suit. Having run an SL-15 years back, my memory tells me that the code was quite similar to Fanuc 🤔

[serge.quiblier · Accepted solution]

Hi @rjkootCC85N,

you can eventually try the beta post created for the Yasnac LX3 controller.

It can be found in the post idea station:

https://forums.autodesk.com/t5/hsm-post-processor-ideas/yasnac-lx3-turning-post-processor/idi-p/1237...

As this is a beta post, please test carefully, and don't hesitate to provide feedback, so that we can improve and hopefully release the post to the wider audience.

Have a pleasant day.

______________________________________________________________

If my post answers your question, please click the "Accept Solution" button. This helps everyone find answers more quickly!