Machining simulation hangs up computer

[wardmichael]

Included is a simple file that for whatever reason I can't seem to use the machining simulation on.  It hangs up the computer.  I can load another part and can simulate fine.  I had a crash at one point due to loss of internet on this part but it seems to have recovered fine.  Could someone try it and see of the machining simulation causes a crash?  ANy ideas why?

[seth.madore]

No, simulates fine for me. Have you tried regenerating your toolpaths and giving time for the In Process Stock generation to catch up?

[wardmichael]

I tried to regenerate the toolpaths but it seems to have hung up doing that as well.  It made it rapidly through the first 6 but has been on the 7th for over 10 minutes.

[wardmichael]

It's weird as I can open other parts - do simulations fine.  But as soon as I load this one any further operations seem to hand up the computer.  I'm at a loss ...

[programming2C78B]

Cursed file on my end. As soon as I hit simulate, program freezes white and shuts down. 

[wardmichael]

I assume no way to recover it?

[wardmichael]

weird that it worked fine for Seth?

[seth.madore]

Can you:

1) Open Fusion, but don't open any file

2) Switch to MFG workspace

3) Navigate to the Utilities tab and turn off In-Process Stock calculation

 

4) Open your file.

Does it still lock up?

What happens if you just simulate the "simple" toolpaths (all the 2D ones; drill, face, adaptive)

[wardmichael]

that seems to have stopped the locking up.  Kind of makes toolpath visualization tough though.

[wardmichael]

well darn it seems its locking up again ...