Is it possible to turn off verification in CAM Simulation?

[marcus.toepke]

Hi all!

If I start a CAM simulation there is always a verification!

That is good and it tell me if there are some problems in front of the screen or in my operations!

BUT if I do nothing at my operations and think: "Hey how was the toolpath again" and I start the simulation again the verification starts also again!

There is no reason to calculate the verification again! 

In small or medium projects it is no problem, but if the projects become bigger or Fusion calculates  stock in progress in the background or something else, you sit in front of the screen and the time becomes long!

Now I ask myself if there is a way to turn this verification temporary off?

I think the best way would be for Fusion to realize if it needs to be recalculated at all!

[brekmiller · Accepted solution]

We are looking at ways to store verification results with toolpaths so that simulation doesn't need to keep repeating the verification step.

For now, you cannot turn off verification. But if the computation is using up CPU resources and getting in your way, you can pause verification.

Go to the "Info" tab and scroll to the bottom. If verification is still running, there will be a Pause button there.