How to shorten rapid distance on a wrapped 2D contour toolpath

[jdkendall97]

Im doing a 2D contour with a wrap to cut a chamfer. How do I get rid of the tool going 360deg around the part. Trying to get rid of extra tool movement.

jdkendall97_0-1681693924410.png

When it does go around like that it shudders. See video below

https://drive.google.com/file/d/108FmC0b7ZwWziQa0qCzqxe4NQe3Zdfx-/view?usp=share_link

[a.laasW8M6T · Accepted solution]

Is this on a Haas machine?

If so you need to use Highfeedrate instead of Rapids:

highfeed.png

You could also do the two edges in two separate toolpaths which would make it so the rotary is rapiding by itself. not combined with the linear axes