Help getting diameter offset for Okuma cadet mate vmc

[RGATICA80]

Hi,  I need some help with the Okuma post. I am running a Okuma Cadet Mate that need an H AND D offset in the post.  I have the heights offset.  But I do not have the D offset.  Right now I am currently going through the program and adding it where needed.  Is there something I need to do in the post or when programming?  

Thank you for the help.

O1005
(T10 D=0.75 CR=0. - ZMIN=-1.252 - flat end mill)
N1 G40 G80 G90 G94 G17
N2 G20
N3 G00 Z400.

(2D Contour2 2)
N4 T10 M06
N5 S2546 M03
N6 G15 H02         (I have been adding the "D" on this line.
N7 M08
N9 G00 X1.1738 Y0.477
N10 G56 Z0.599 H10
N11 Z0.199
N12 G01 Z0.0384 F7.202
N13 Z-1.252
N14 X1.0798 Y0.3602 F21.605
N15 G03 X1.0146 Y0.2788 I14.227 J-11.4511
N16 X0.96 Y0.19 I0.3391 J-0.2697
N17 X1.0148 Y-0.2793 I0.4128 J-0.1897

[billcainautodesk]

Hello RGATICA80,

The "D" diameter offset will come out when a G41 or G42 is called. Is this not happening?

This is from Okuma Manual

N02 G56 Z -30. F200
N03 G01 G41 Y100. D08
(D08 = 10 mm)
N04 Y300.

[RGATICA80]

No,  it is not posting the G41 or G42.  also do not have the option to choose them when I am posting to the Okuma machine on the fusion post.

[leo.castellon]

In the passes dialogue box, do you have "Wear" selected? This will output your "D" for your offsets. See attached.

LeoC

[RGATICA80]

Hi leo.castellon.  I did not at first. then played around with it some more and I have it changed to "In Control" and that posted the g41 g42 command. So we are all good now.   

Thank you guy for the help.

[RGATICA80]

Hello,  I am wondering how I can get a G95 and G94 code to work for tapping on an OKUMA CADET MATE possibly 1998.