Heidenhain mill/turn post

[joel_keenYLEFA]

Good afternoon all,

Is there a baseline post for Heidenhain mill/turn (i.e. Hermle C42 UMT type or any other for that matter) in the same way as the milling one? I can see the ManualPlus turning post but there doesn't seem to be a mill turn one in the same way as Okuma/Mazak etc.

Thank you

Joel

[CNC_Lee]

@joel_keenYLEFA 

You will need to get a custom post processor written if the generic posts are not providing the required output for your machine. I offer post processor development services and happy to work out a solution for your machine! Message me if I can be of assistance.

[serge.quiblier · Accepted solution]

Hi @joel_keenYLEFA 

we don't have a generic post for that purpose.

But as i explained in another thread, we can apply the same logic as in the turn-mill post.

See:

https://forums.autodesk.com/t5/fusion-360-manufacture/siemens-5-axis-turn-mill-fusion-360-post/m-p/1...

The Heidenhain version will use FUNCTION MODE TURN, or MILL, and the CYCLE 331, 332, and 333 for activating the different modes.

Regards.

______________________________________________________________

If my post answers your question, please click the "Accept Solution" button. This helps everyone find answers more quickly!