Hass 4th axis post, g91 instead of g90

[Anonymous]

I NEED HELP IM RUNNIN A 4TH AXIS JOB WITH JUST A CYLINDER WITH 8 HOLES AROUND IT AND CHAMFER, MY POST SAYS A0. RUNS GOOD NEXT IS A45.    BUT IT ROTATES A FULL 180. OR SO ... MY PART IS COMING OUT GOOD BUT WONDERING WHY IS IT JUMPIN AROUND IN A AXIS INSTEAD OF JUST GOING AROUND HOLE FOR HOLE... IM USING THE FUSION 360 HAAS WITH A AXIS PRE NGC POST, ANY HELP IS GREATLY APPRECIATED THANK YOU IN ADVANCE

SIMULATION LOOKS RIGHT, WHEN IN MACHINE IT SAY A0 A45 AND SO ON BUT IT SEEMS TO BE JUMPING AROUND IN THE A AXIS 

[seth.madore]

A) Typing in ALL CAPS is not easy on the eyes and is the digital equivalent of yelling. Check the CAPS lock button 😉

B) Without a file it's nigh impossible to troubleshoot the issue. Please export the .f3d file and attach it in your next reply.

[Anonymous]

sorry about the caps, link to my part

I hope this is what you asked for. not sure of a f3d file sorry. 

[Anonymous]

figured it out here is the f3d file thank you

[Anonymous]

Thanks for all the help, solved. 

Nothing wrong with the program itself, my problem was the parameters for my 4th axis were off.

THANKS AGAIN. =