Haas TL1 Turning Post

[cunion]

Is the "HAAS Turning'' post processor from the Fusion 360 post library the correct post for the HAAS TL 1. I don't see a specific option for the TL 1. Thanks!

[KrupalVala]

HI @cunion ,

We have generic HAAS Turning post processor. 

Please Change the post-property "Use tool changer" if your CNC does not have an automatic tool changer.

Use Turret 0 for Positional Turret, Turret 101 for QCTP on X- Post, Turret 102 for QCTP on X+ Post, Turret 103 for Gang Tooling on X- Post, Turret 104 for Gang Tooling on X+ Tool Post.

Thanks,

[cunion]

Thanks. I will try it out!

[John_Wright]

Please feel free to try the attached post. I modified the standard HAAS post to work with my TRL1 which seems to accept the G-code fine. I offer no guarantees though, and please check any G-code safely before running it.