Fanuc 4th Axis post help.

[Natranzow]

So were using a rotary but the post were getting keeps putting out something like this

G68.2 X0. Y0. Z0. I180. J90. K180.
G53.1

How can i get an output of G90 A...

Also there is no starting coordinate in the post. So im the rotary is at say a100, it starts there instead of a0

Any ideas?

[seth.madore]

It sounds to me like you are using the regular Fanuc or Haas post. You need to use the one labeled "-inverse time/A axis"