ESAB Plasma Table with fusion 360

[jmccartyZSC9Y]

I have found that using the Messer Plasma machine that exports a txt file will work for my ESAB plasma table. The ESAB was originally made by HoneyBee and I was told it needed a TXT file format. I finally found the one that worked. I hope this helps anyone out there I know it was a big pain in my butt to find any information on the ESAB plasma table.  Good Luck and I hope this helps anyone with an ESAB.

Jamis

4/15/22

[boopathi.sivakumar]

Hi @jmccartyZSC9Y 

We have a ESAB plasma post, currently in the beta mode, it is not yet released. If you wish to test the post then feel free to try this post and give us feedback

https://cam.autodesk.com/hsmposts?p=esab_plasma

[jmccartyZSC9Y]

Thank you for the link I tried to find it off another link and had no luck I will check it out and let you know if we have any issues.  

JAMIS

[jmccartyZSC9Y]

Thank you for the link I tried to find it off another link and had no luck I will check it out and let you know if we have any issues.  



JAMIS

[LeeVerage]

Hi @boopathi.sivakumar  has there been any further progress made with this beta post?

We have a customer looking for a ESAB post for their plasma as well.