Error: Could not generate the toolpath because of an unexpected error. Invalidated: Generation failed

[tiarraZB]

Hi, for some weird reason, when I do the "Adaptive Clearing" I keep getting this error message. I'm not understanding why this is happening. The toolpath has always worked for me before. Can someone please help me figure this out? I have to cut this project in the next 30 minutes! 

[christopher_marion]

Hello @tiarraZB 

Can you share your file?  It will be much easier to diagnose.

Thanks,

[Doubletapputters]

Im having this same problem.   recently renumber all my tools now just the 3d adaptive files wont generate.  did you get a solution to this?

[GeorgeRoberts]

@Doubletapputters please could you share your file? There are a lot of things that could cause a toolpath to fail generation, so it's likely that the root cause is different. If you can share your file, we can take a look and find out what's happening

[programming2C78B]

if the bore cycle generated, im betting you selected that entire block as your model and not as your stock.

[Doubletapputters]

What email should I send it to?

[GeorgeRoberts]

Either upload it here, or ping me: george.roberts@autodesk.com 

[Doubletapputters]

Just sent you an email.  Thank you.  I really appreciate your insight