Easel post process error's

[Anonymous]

im trying to send gcode using the easel post configuration. No  idea what im doing wrong here????   here is the error popping up every time...

Information: Configuration: Easel
Information: Vendor: Inventables, Inc.
Information: Posting intermediate data to 'C:\Users\Christina\Desktop\1001.txt'
Information: Total number of warnings: 1
Error: Failed to post process. See below for details.
...
Code page changed to '1252 (ANSI - Latin I)'
Start time: Monday, January 27, 2020 12:02:29 PM
Code page changed to '20127 (US-ASCII)'
Post processor engine: 4.55.0 0
Configuration path: C:\Users\Christina\Downloads\f360-easel.cps
Security level: 1000
Include paths: C:\Users\Christina\Downloads
Configuration modification date: Monday, January 20, 2020 2:41:47 PM
Output path: C:\Users\Christina\Desktop\1001.txt
Checksum of intermediate NC data: 3ad2bdfa94f6fbdbb80c1911f3bcb5fb
Checksum of configuration: f722a5905055e04329ac0fa4e8e55f75
Vendor url: https://inventables.com
Legal: Copyright (C) 2012-2015 by Autodesk, Inc.
Generated by: Fusion 360 CAM 2.0.7402
...
Warning: Work offset has not been specified. Using G54 as WCS.

###############################################################################
Error: Invalid coolant mode
Error in operation: '2D Adaptive4'
Failed while processing onSection() for record 367.
###############################################################################

Error: Failed to invoke function 'onSection'.
Error: Failed to invoke 'onSection' in the post configuration.
Error: Failed to execute configuration.
Stop time: Monday, January 27, 2020 12:02:30 PM
Post processing failed.

[Tomek.G]

Hi @Anonymous,

did you try to generate your code from the latest version of the post?
Easel by Inventables 

If so, and it causes the same alarm, can you share your project?