Drilling with a static tool on a lathe G97 G98 help

[kuhnjst]

Hi everyone,

So having some issues with our post.

hwacheon hi-tech 230al mill-turn fanuc.cps

Long story short we've crashed 2 corebores because i cant figure this out.

Posts out G98 then switches to G97 when it turns on the spindle. Which is fine we want it to drill mm/r but then feed rate is coming out at mm/m and trust me, drilling 100mm/r is hard on corebores! How/ where do i fix this in the post? From what i can see(new at editing posts by the way) drilling with a static tool is un-heard of? Nobody drills with a lathe? If Its using live tooling its fine. G98 F100. 

RILL3)

G00 G28 U0.

G28 W0.

M05

M39

G54

G98 G17 M28

G00 G28 H0.

M38

T0404

M08

G97 S1000 M03

M39

G00 C0.

M38

G00 Z15.

X0.

G80

G00 Z5.

G83 Z-19.85 R-1. F100. M38

G80

G00 Z15.

M05

[CAMtech_Software]

Here is the link to solve this problem
https://forums.autodesk.com/t5/fusion-360-manufacture/fanuc-driling-cycles-f-and-q-parameter-eror/m-...

[CAMtech_Software · Accepted solution]

please pay attention to these. If your problem cannot be solved, we can arrange a special post for you.

 

 

[kuhnjst]

Thank you so very much!!!! posted out correctly! Will test more drilling programs but so far it looks GREAT! thanks again.

[CAMtech_Software]

I felt sorry for Hwacheon. hope you live again 😎