Hello,
I have a CNC Routerparts CNC and use their post-processor along with Mach 3. I'm having an issue when I hit cycle start my z-axis will travel up until it hits the limit switch. All the research I've done is more confusing than helpful and any help would be greatly appreciated. Here's the g-code that shoots up after it calls for a tool change and cycle start is pressed.
(T4 D=0.25 CR=0. - ZMIN=-0.522 - FLAT END MILL)
(T10 D=0.5625 CR=0. TAPER=45DEG - ZMIN=-0.0412 - CHAMFER MILL)
G90 G94 G91.1 G40 G49 G17
G20
(.125 TILE STEPSHORIZONTAL2)
M5
M9
T4 M6
S7000 M3
G54
G0 X32.5257 Y1.5999
G43 Z0.6 H0
Z0.4432
G1 Z0.1562 F75.
X32.5255 Y1.5998 Z0.1528
X32.5248 Z0.1494
X32.5236 Y1.5997 Z0.1461
