CNC

[DD44download]

CNC post setup for Zenbot 2424.  Can any of the generic brands be used?  I cannot find any information on the machine to set the G code anywhere. Thanks Stuart

[boopathi.sivakumar]

Hi @DD44download 

This machine runs on the mach3 controller i guess, so the best post to start with is mach3 mill post

 

[DD44download]

Thank you for the information.  Still trying, my next question is,  with Fusion 360 I can setup all the feeds, speeds, Geode etc.  is the Mach3 still required?  The ZENBOT cnc is a couple years old but I don't want to just dump it until I have tried all the information I can get.  Thanks again Stuart

[boopathi.sivakumar]

Mach 3 is the controller which works behind your cnc controller. So while creating an NC program you have use mach3mill as the post processor to get the proper g codes

To know on how to create nc program refer this link below

https://help.autodesk.com/view/fusion360/ENU/?guid=MFG-REF-NC-PROGRAM