Can Not Post

[Anonymous]

I cant seem to get this to post. Trying to run on a haas GT20

https://a360.co/2mL1D6C

Keep Getting this error.

Information: Configuration: HAAS (pre-NGC)
Information: Vendor: Haas Automation
Information: Posting intermediate data to 'C:\Users\poker\Desktop\5675.nc'
Error: Failed to post process. See below for details.
...
Code page changed to '1252 (ANSI - Latin I)'
Start time: Friday, July 27, 2018 11:12:28 PM
Code page changed to '20127 (US-ASCII)'
Post processor engine: 4.2.1 42050
Configuration path: C:\Users\poker\AppData\Local\Autodesk\webdeploy\production\cb1bef8838872a2e3851e05f573943bd9783b1ce\Applications\CAM360\Data\Posts\haas.cps
Include paths: C:\Users\poker\AppData\Local\Autodesk\webdeploy\production\cb1bef8838872a2e3851e05f573943bd9783b1ce\Applications\CAM360\Data\Posts
Configuration modification date: Monday, July 23, 2018 8:55:36 AM
Output path: C:\Users\poker\Desktop\5675.nc
Checksum of intermediate NC data: 882c7dfd644064291f789bca82b17302
Checksum of configuration: 1578aa229fdca9cff8fbe1f0fcd6dc7b
Vendor url: https://www.haascnc.com
Legal: Copyright (C) 2012-2018 by Autodesk, Inc.
Generated by: Fusion 360 CAM 2.0.4343
...

###############################################################################
Error: Turning toolpath is not supported by the post configuration.
Failed while processing onOpen().
###############################################################################

Error: Failed to invoke 'onOpen' in the post configuration.
Error:
Error: Failed to execute configuration.
Stop time: Friday, July 27, 2018 11:12:28 PM
Post processing failed.

[Anonymous]

I would check your post file, I just posted with mine and had no issue at all.  Looks like you might be using a Mill post and not a turning one. The one I used is for the ST30Y. Hope this helps.