CAM: Post Process to a LNC-M510i CNC Router

[Anonymous]

Have not found the appropriate Post Processor to LNC.
Any suggestions?
Today I take Haas.cps postprocessor and manually change the beginning.

[LibertyMachine]

Did the Haas post work for you? What did you edit?

Prior, what post had you tried?

Do you have any proven programs for your machine, programs that you have run and you know they work?

[Anonymous]

I have tried HAAS (Pre-NGC) / haas post.

Moves M03 up a row and then deletes all above, add G90.

Must also delete all parentheses in the code, machine stops when parentheses appear.

(This feels very wrong to do in this way, but the machine does the job in this way).

Before:

%
O02001 (6mmBull)
(Using high feed G1 F5000. instead of G0.)
(T1 D=6. CR=1.5 - ZMIN=-31.995 - bullnose end mill)
N10 G90 G94 G17
N15 G21
N20 G53 G0 Z0.

(Adaptive1)
N30 T1 M6
N35 S15000 M3
N40 G54

After:

G90
N30 M3
N35 S15000
N40 G54