Building own machine with a table that moves in z

[GielWNLDD]

I want to make a DMU 80T XYB and ZC movements. The problem is that de simulated tool is not oriented like I have defined on the center of the toolholder. 

[a.laasW8M6T · Accepted solution]

Hi

The machine model may have been moved relative to the document origin after the tool attachment point was selected.

To fix this follow these steps:

• Go into Machine builder to edit the machine
• Change the tool attachment point to a different location
• Save the machine and exit machine builder
• enter machine builder and select the correct attachment point
• Save the machine again.

You will need to delete the machine from any setups you have used it in and pick it again from the machine library for it correctly display again in simulation