Bug with Rapid feed rate in machining time, with a machine selected

[a.laasW8M6T]

So just updated my machine to the  new definition and noticed the machining time was waaay up.

My machine has 40,000mm/min rapids.

If I create a setup with no machine the machining time is correct using 40m/min rapids.

If I add my machine the machining time is now using 666.66666mm/min which is a factor of 60 slower

seems there's some maths errors going on there

[seth.madore]

Go into the Kinematics and adjust your Rapid Feedrate?

 (not sure if this will impact anything, just figured I'd make the suggestion)

[a.laasW8M6T]

All is fine in my kinematics section too

to check my theory I changed the max rapids to 2,400,000 mm/min (40,000x60) and now the machining time shows correctly

So there's definitely something funny going on

[mattdlr89]

Yeah it’s a bug I see the same. As you say it’s out by a factor of 60. Someone’s got their seconds and minutes confused… 

[Garrett_Wade]

Seeing the same thing, and same fix is working for me also (*60 to get correct results)