Acramatic 850sx Post Processor

[coachsmithing]

Hi, Can any one tell me if fusion 360 has a post processor that is compatible with a Cincinnati Milacron Avenger 250MS CNC Turning Center Lathe with Live Tooling. It has an Acramatic 850sx controller. If not, does anyone know where I would be able to find/have one made?

Thanks.

[will_1]

Hi @coachsmithing ,

I may be able to help you here.

Do you have a programming manual for this machine?

Thanks,

Will Watkins

[coachsmithing]

Yes, I have a programming manual for the machine.

[will_1]

Hi @coachsmithing ,

Can you send the manual to me? If you don't have a digital copy send pictures or scans of the pages with G code explanations. I would prefer the entire manual but the explanations will get me started on the post processor. You can attach the files when you reply or dm me.

Thanks,

Will Watkins

[coachsmithing]

Great, I will be sending pictures of the manual. It will take me a
little while to get that done. Today hopfully.

Thanks,

Noah

[coachsmithing]

Is there a way that I can directly email you? Autodesk will only allow me to add 3 attachments at a time.

Thanks

Noah

[will_1]

Hi @coachsmithing ,

I sent you a direct message with information on this.

Thanks,

Will Watkins

[PatrickPowers-CGS]

Any chance I could get a copy of this post??

[will_1]

Hi @PatrickPowers-CGS ,

Yes, we can send you a post processor. Check your direct messages.

Thanks,

Will Watkins 

[will_1]

Here is a turning post that should be in a pretty good place for this machine.

https://cam.autodesk.com/hsmposts?p=acramatic_850sx_turning

Thanks,

Will Watkins

[Anonymous]

Hi,

Is it possible for you to send me the milling processor as well please?

Thank you,

[andyj67]

I'm looking for this post as well.