5 AXIS POST PROBLEM

[Anonymous]

hi

I'm getting an error when moving the 4th or 5th axis shown in red

O1111 (.125 ALU)
(T19 D=0.25 CR=0. - FLAT END MILL)
G90 G94 G17 G49 G40 G80
G20
G28 G91 Z0.
G90

(BORE1)
T19 M06
S9000 M03
G54
G68.2 X0. Y0. Z0. I90. J0. K-90.
G53.1
M08 (stops here, alarm message:PS5462 illefal command (g68.2/g69))
G5.1 Q1
G00 X-0.0036 Y7.7946
G43 Z4.64 H19

any Ideas? fanuc series oi-md

Thanks

[daniel_lyall]

More detail needed post processor used, machine being used model so on.

[Anonymous]

Its a Dahlih DMX-320

fanuc series oi-md control

5 axis

I downloaded the Fanuc post from fusion https://cam.autodesk.com/hsmposts (the first post)

hope that's enough?

Good videos on your channel!

---

---

[daniel_lyall]

Do you have the Manual it looks like M08 is a auxiliary function for your control, the M08 is sitting there for the coolant on.

Try removing it from the Gcode  and see what happens then, it should be in your manual what to do.