3d model maxicam M8-1212 2T

[ian38Q75]

Hi,

Can someone please help does anyone have a 3d model for a "Maxicam M8-1212 2T" router machine as I would like to simulate in "fusion360" or any other information that would help in creating a 3d model

Thanks

Ian G

[seth.madore]

That's not something we have in the Fusion Library, but there is a Tormach 24R, which is a gantry style router machine. Not sure if the dimensions are comparable to your machine....

Other than that, you may have to start from scratch on it.

[ian38Q75]

Hi Seth,

Thanks for your reply I have found a machine which has very similar kinematics for test purposes.

I would like to get the machine to simulate the toolpaths in fusion 360. I have done the modifications to the post as shown in this video below i can get it to simulate but when i try to post proccess i get an error.

Any help would be much appreciated.  using "osai.cps" post

Link to Fusion project   https://a360.co/3JlSDh8

https://www.youtube.com/watch?v=4zqKmQWtoKc&list=PLmA_xUT-8UlK9rndthGGHsjjnZtPO8XRV&index=14

[seth.madore]

That's because the osai.cps post processor is not configured for 5 axis motion, only 3. You can modify your post processor to grant you access to that motion, following this guide HERE

[ian38Q75]

Hi Seth

The link attached here seems to be about patterns

https://forums.autodesk.com/t5/fusion-360-manufacture/preview-vs-simulation-toolpath-changes-critica...

[seth.madore]

OOOPS! Serves me right for dealing with multiple threads at the same time. Try this link instead 😛