2D Profile cutting with a helical stepdown - Fusion

[tyTG36D]

I am trying to cut a profile and I want to cut the profile using a finishing cycle with no lead in or out just a helical cycle going down at a 1 deg angle. I do not want to cut from the solid but from its silhouette. I have stock surrounding the part I am machining that will be left over after i am done. I have only found something in the 2D contour cycle but it steps down and no option to do a helical path. 

This post has been edited due to: @heather_tracy added the product to the title to help more community members find this topic. 

[matty.fuller]

2D Profile with no multiple stepdowns, no lead ins, and a ramp of 1 degree. It will ramp down to the bottom and then one loop at 0 degrees to finish off.

I wouldn't refer to this as helical unless the feature is actually cylindrical, in which case you would just use the Bore toolpath instead.

[heather_tracy]

Hello, @tyTG36D,

Did the information provided by @matty.fuller help you and answer your question?

If yes, please click on the "Accept Solution" button. This will assist other community users in finding and benefiting from this information.

If not, please do not hesitate to give an update in this thread so all community members receive an update on the progression of your question, and can suggest next steps that may be helpful for you to achieve what you're looking for.

All the best,

Heather | Community Manager