Community
Fusion Electronics
Working an electronics project and need help with the schematic, the PCB, or making your components? Join the discussion as our community of electronic design specialists and industry experts provide you their insight and best practices.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Several application errors

10 REPLIES 10
Reply
Message 1 of 11
p.kuzior
359 Views, 10 Replies

Several application errors

Hello,

 

When I want to move a group of elements I choose the "select" tool, unfortunately I often have to select 2x, because the first time is not checked.

In the program settings I have increased the contrast of the selected elements, (I marked "high contrast" and increased the slider to 3/4) everything is ok, but after a while the settings return to the default, although when I go back to the settings everything is well set. After clicking only OK everything is ok again - for a short time.

 

On one monitor I have a schematic file, and on the other PCB, when I choose the option of highlighting an element / path, the selected element on one screen is marked, and on the other randomly, sometimes, I move the cursor to the other monitor, the selection disappears.

10 REPLIES 10
Message 2 of 11
p.kuzior
in reply to: p.kuzior

I found more problems. I finished the project, I clicked on "Errors" showed me that I had 2 errors - "airvire", although it was connected. Ok, I deleted the path and created it again. I was very surprised, because instead of 2 mistakes I already had 4. I removed this path again and put it again, this time there were already 6 errors.

Message 3 of 11
ESCAPEKIT
in reply to: p.kuzior

Yes, this happens. It had happened to me already in Eagle so I just verify visually that it is in fact connected and I approve the error so it doesn't show anymore.

Message 4 of 11
p.kuzior
in reply to: p.kuzior

Another problem is the use of import-bmp.ulp, from what I see in the forum other people do not have a problem with it, every time I want to run the script I get the message: "error in constant". I downloaded the same script from autodesk website, to no avail.

Message 5 of 11
jorge_garcia2
in reply to: p.kuzior

Hello @p.kuzior,

I hope you're doing well. Is it able to open at all or you just get that error right off the bat? Could you try it in a different design to see if it behaves the same way?

Let me know if there's anything else I can do for you.

Best Regards,


Jorge Garcia
​Product Support Specialist for Fusion 360 and EAGLE

Kudos are much appreciated if the information I have shared is helpful to you and/or others.

Did this resolve your issue? Please accept it "As a Solution" so others may benefit from it.
Message 6 of 11
p.kuzior
in reply to: jorge_garcia2

hmmm weird, it didn't work on Friday, now it seems that it's ok

Message 7 of 11
p.kuzior
in reply to: p.kuzior

I found another 2 problems.

First with generating gerber files. I made a very simple adapter.

adapter.png

 

 

 

 

 

 

the preview of the generated gerber file looks like this:

adapter.png

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

next gerver viewer:

gerber2.png

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

another problem concerns the 3D preview, it looks like this:

3d.png

Message 8 of 11
jorge_garcia2
in reply to: p.kuzior

Hello @p.kuzior,

I hope you're doing well. What gerber viewers did you use? Something looks definitely off there. I'll ping the developers on this for review.

Let me know if there's anything else I can do for you.

Best Regards,


Jorge Garcia
​Product Support Specialist for Fusion 360 and EAGLE

Kudos are much appreciated if the information I have shared is helpful to you and/or others.

Did this resolve your issue? Please accept it "As a Solution" so others may benefit from it.
Message 9 of 11
p.kuzior
in reply to: jorge_garcia2

I use gerbv, it never let me down, the second picture is from the preview at jlcpcb.com. I noticed that sometimes when I restart the program (fusion) the problem disappears, but not always.

Message 10 of 11
jorge_garcia2
in reply to: p.kuzior

Hi @p.kuzior,

I hope you're doing well. I don't trust the jlcpcb.com preview at all, I've had to deal with a lot of issues with them. I've worked with gerbv a lot and even though it's lead me astray a couple of times, it's very solid and I do trust it.

Would you be able to share the gerbers for review?

Best Regards,


Jorge Garcia
​Product Support Specialist for Fusion 360 and EAGLE

Kudos are much appreciated if the information I have shared is helpful to you and/or others.

Did this resolve your issue? Please accept it "As a Solution" so others may benefit from it.
Message 11 of 11
ampio
in reply to: jorge_garcia2

I was able to call this error again, in the attachment I send incorrectly generated gerber files.

 

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report