Community
Fusion Electronics
Working an electronics project and need help with the schematic, the PCB, or making your components? Join the discussion as our community of electronic design specialists and industry experts provide you their insight and best practices.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Panelize PCB with Fusion 360 Electronics

3 REPLIES 3
Reply
Message 1 of 4
d.vendraQ2XDZ
109 Views, 3 Replies

Panelize PCB with Fusion 360 Electronics

Hi,

I am suffering for Panelize PCB in Fusion 360 Electronics, previously Eagle now with Fusion since 2020. Now its 2023 and still we have not  an  important feature for PCB like Panelize.

 

If here any officials here from Fusion 360 team, its a humble request to add Panelize PCB feature in Fusion 360 Electronics. or please give some information about this feature if it is on the roadmap or we can get this in future or not.

 

Thank you so much.

3 REPLIES 3
Message 2 of 4

Hi @d.vendraQ2XDZ,

 

I hope you're doing well. I've added your comments to the existing ticket for this request. As of right now we don't have any ETA for it. At this moment, you can work around it by disabling the Detect Board shape functionality and running the panelize ULP. If you are interested in the work around let me know and I'll post more details.

 

Let me know if there's anything else I can do for you.

 

Best Regards,



Jorge Garcia
​Product Support Specialist for Fusion 360 and EAGLE

Kudos are much appreciated if the information I have shared is helpful to you and/or others.

Did this resolve your issue? Please accept it "As a Solution" so others may benefit from it.
Message 3 of 4

Thank you so much @jorge_garcia2  for replying.

Yes you can add this feature request in exsiting ticket. At present we do panelize pcb manually which is very complex, not linked, time consuming. I think it will be more better if we got a dedicated feature or tools (NOT ULP) for panelize the PCB's (like Altium). It will be more helpful for everyone and very easy, time saver.

 

Its very strange that about 3 years and still this feature has not in development or no hope for that we can get it in near future.

 

Thank you.

Message 4 of 4

Hi @d.vendraQ2XDZ,

 

I hope you're doing well. I totally agree that it would be nice to have a dedicated feature. Especially considering that we have such excellent arrange tools at Autodesk. I will report your comments and add them to the ticket.

 

I don't have any timeline for this yet, however every voice helps get eyes on it and this in turn can raise it's priority. 

 

Let me know if there's anything else I can do for you.

 

Best Regards,



Jorge Garcia
​Product Support Specialist for Fusion 360 and EAGLE

Kudos are much appreciated if the information I have shared is helpful to you and/or others.

Did this resolve your issue? Please accept it "As a Solution" so others may benefit from it.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report