Community
Fusion Electronics
Working an electronics project and need help with the schematic, the PCB, or making your components? Join the discussion as our community of electronic design specialists and industry experts provide you their insight and best practices.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Manual Route results in extra ( unintended ) traces

1 REPLY 1
Reply
Message 1 of 2
kevin2MSFQ
82 Views, 1 Reply

Manual Route results in extra ( unintended ) traces

When I use manual route, Fusion offers some form of assistance to guide the route.  This used to work great - It is now very broken.

 

I am updating a design from a dew months back - when I manually route - all of the guesses the assistance does, gets left as routes.  This results in things like this ( there should only be 2 bottom side traces.  All of the parallel traces are the assistance guesses that are left behind )

kevin2MSFQ_0-1645468832896.png

 

 What am I doing wrong here?

 

Kevin

1 REPLY 1
Message 2 of 2
panpan_fan
in reply to: kevin2MSFQ

Hi @kevin2MSFQ 

I hope you are doing well!

Can you still reproduce this issue now?

If you can, please send your file to me. I will check for you.

I will send my email address to you as a private message.

Regards,

Panpan Fan

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report