Community
Fusion Electronics
Working an electronics project and need help with the schematic, the PCB, or making your components? Join the discussion as our community of electronic design specialists and industry experts provide you their insight and best practices.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Integration between Eagle is not pushing holes into Fusion for PCBs

2 REPLIES 2
SOLVED
Reply
Message 1 of 3
sensordynamix
188 Views, 2 Replies

Integration between Eagle is not pushing holes into Fusion for PCBs

Hello... I have noticed this bug while using Eagle and Fusion. It seems to have just come up in the past week or two. The holes that I place on the PCB in Eagle are not pushing correctly to Fusion. The rest of the through holes from the device footprints are pushing but the holes created for the actual board are not. I use this feature regularly to design enclosure mounting and I'm currently stuck while this bug exists. 

deba9170b29c1751bd886eaf15578719.png

 

856588d2c30cfa9d7d23a4ac256f4953.png

88880da77622e752f8fc4058a00b8244.png

705a84af11257090e934ea921b6842b3.jpg

Labels (4)
2 REPLIES 2
Message 2 of 3

Hi @sensordynamix ,

 

For now try breaking the link and then re-linking it.

 

Let me know if there's anything else I can do for you.

 

Best Regards,



Jorge Garcia
​Product Support Specialist for Fusion 360 and EAGLE

Kudos are much appreciated if the information I have shared is helpful to you and/or others.

Did this resolve your issue? Please accept it "As a Solution" so others may benefit from it.
Message 3 of 3

I had to relink it to a new design but that solution did work with that small variation. Thank you!

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Technology Administrators


Autodesk Design & Make Report