I need links to a crash tutorial on 3D modelling!

[anthonyEX9NB]

I am an electrical engineer and I am becoming pretty solid using Fusion 360 Electronics. But I working on a side project where I need to check for physical fit an interferences when I insert the Fusion 360 generated 3D model of my PCB into an enclosure.

To be clear, I am not doing any 3D modelling myself (I am not building any models). I am uploading models for the enclosure and some other pieces that will attach to the PCB (but not soldered onto the PCB) and then inserting my Fusion 360 PCB into the enclosure. I need to be able to move each model around and attach to the PCB or the enclosure. And I need to be able make opening in the enclosure for connectors.

Can somebody give me a link to a video or a step-by-step example?

Thank in advance.

[jorge_garcia]

Hi @anthonyEX9NB,

I hope you're doing well. If you are in the Portland area one of our employees gives classes at Portland Community college. Additionally, Help > Learning and documentation > Self paced learning. The first 3-4 modules cover sketches and modeling basics.

Let me know if there's anything else I can do for you.

Best Regards,

[anthonyEX9NB]

Thanks for responding, @jorge_garcia . I tried following the path you suggected to self-paced learning but I get sent to a broken link.

Where have the self-paced learning tutorials gone?

[anthonyEX9NB]

Whoop! Never mind. I just installed the update for 7 Feb and the self paced learning links are back.