Community
Fusion Electronics
Working an electronics project and need help with the schematic, the PCB, or making your components? Join the discussion as our community of electronic design specialists and industry experts provide you their insight and best practices.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

CAM Processor

6 REPLIES 6
SOLVED
Reply
Message 1 of 7
mphatak68
323 Views, 6 Replies

CAM Processor

A couple of simple questions about the Fusion 360 Electronics CAM processor:-

 

1. Every time I open the CAM processor, I need to load my .CAM file. How can I make my .CAM file the default file?

 

2. The option to 'Export to Project Directory' seems to export all CAM files out to the /Documents/Fusion360 folder (on MacOS). How can I change this default project directory? I cannot seem to find this option anywhere in Preferences..

 

Thx

Tags (1)
Labels (1)
6 REPLIES 6
Message 2 of 7
jorge_garcia2
in reply to: mphatak68

Hi @mphatak68 ,

 

I hope you're doing well. 

 

1) Currently not possible, it's low hanging fruit but it hasn't been done yet.

 

2) Also currently not possible, just hasn't been done.

 

@panpan_fan Could we make it enhancement requests for this? Thank you for making the ticket.

 

Let me know if there's anything else I can do for you.

 

Best Regards,



Jorge Garcia
​Product Support Specialist for Fusion 360 and EAGLE

Kudos are much appreciated if the information I have shared is helpful to you and/or others.

Did this resolve your issue? Please accept it "As a Solution" so others may benefit from it.
Message 3 of 7

@jorge_garcia2looking forward to this enhancement  😍

Carlos Acosta
Factory400 - YouTube|Instagram
Message 4 of 7
mphatak68
in reply to: jorge_garcia2

Thanks, Jorge. Looking forward to seeing these improvements.
Message 5 of 7
panpan_fan
in reply to: jorge_garcia2

Hi @jorge_garcia2  @mphatak68  @engineeringNCMXB 

 

I have logged a ticket for this issue and will keep you updated when I get more Information.

 

Regards,

Panpan Fan

Message 6 of 7
mphatak68
in reply to: mphatak68

Just wondering if this request was ever implemented?

Message 7 of 7
jorge_garcia2
in reply to: mphatak68

Hello @mphatak68,

 

I hope you're doing well. #1 was implemented. #2 is already available you have to go in the Gerber  setup in the CAM processor and adjust the export path. You may have to save it as your own CAM job.

 

Let me know if there's anything else I can do for you.

 

Best Regards,



Jorge Garcia
​Product Support Specialist for Fusion 360 and EAGLE

Kudos are much appreciated if the information I have shared is helpful to you and/or others.

Did this resolve your issue? Please accept it "As a Solution" so others may benefit from it.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums