bus breakout signal order incorrectly reverted when using right mouse click

[s3qin]

I was using the bus function in the Fusion 360 electronics project in the schematics.

I was trying to break out multiple nets simultaneously from the bus but needed to reverse the bus net order. For example, the net names are net_1, net_2, net_3, net_4, and so on. So, by default, the order is "net_1, net_2, net_3, net_4" with "net_1" at the top and "net_4" at the bottom when the breakout multiple nets operation is selected. But I need "net_4" to be at the top and "net_1" at the bottom. So, I just use the right click of my mouse.

This is when I encounter issues. This operation sometimes will correctly revert the net orders when the number of nets is small (<5 nets), but most times, the operation doesn't work. The net order will become completely out of order.

Please watch the video to understand the problem more clearly.

[jorge_garcia]

Hello @s3qin,

I think you are running into undefined behavior here. A right click with the net command just changed to the complement of the current bend style. It's not meant to reverse the order of the broken out nets. For now, if you need to reverse the order of the nets you'll have to break them out individually. I'll pass this along to the developers for review.

Let me know if there's anything else I can do for you.

Best Regards,