Some NPTH in wrong place in 3D PCB

[davidbZVVVW]

In the design in the pasted image, some of the NPTH holes are not showing up in the right place, when I push this design to the 3D PCB. Some are coming from 3 of the switches that have been free rotated, but there is also a missing hole that is supposed to be under the socket. As far as I can tell, the PCB itself is fine, the Gerber files look fine.

Any ideas?

[panpan_fan]

Hi @davidbZVVVW 

I hoe you are doing well!

Would you mind sending your file to us? I will send my email address to you as a private message.

Thanks in advance!

Regards,

Panpan Fan

[davidbZVVVW]

Fortunately (or unfortunately), the problem is rather intermittent, and I'm not sure hot to figure out which version of the PCB document goes with which version of the 3d model.

I think I was able to get rid of the problem entirely by disconnecting the 3d model from the PCB, and creating a new one. I'll update if I see the issue again.

[panpan_fan]

Hi @davidbZVVVW 

It is great that you 'fix' this issue.

I guess this issue is caused by your component and special board shape.

If you don't mind, you can still send the f3z file to me even it works well now.

We can do more testing on it and fix the real issue.

Thanks in advance!

Regards,

Panpan Fan