Problems with milling layer

[silvio3105]

Hi,

Why this Fusion does not recognize as hole?

Thanks!

Rectangle is milling layer

[silvio3105]

Bump!

[silvio3105]

Little bump

[jorge_garcia]

Hi @silvio3105,

I hope you're doing well. In this scenario what would be the expected result? I actually see the current behavior as better to any alternative I can think of. You would get some weird swiss cheese thing happening here.

Best Regards,

[silvio3105]

Screenshot from first post was made when I draw first PCB shape. That cutout where R1 is(down in the middle).

I had to edit DXF file which I used for PCB shape.

[yqliu]

@silvio3105 , the problem here is the milling area goes beyond the board region. 

To edit the outline from imported dxf, the most convenient method is to import the dxf in sketch environment and there are many sketch tools you can use to modify it. Once you get the shape you want, you can create a 3D PCB and then push to 2D PCB to use the outline.

[silvio3105]

Yes, I fixed by importing DXF with right shape so I did not use milling layer.
I hope this bug will get fixed.